HATZ Diesel 4H50TIC User Manual
Page 61
Overview of changing the oil filter (vertical installation)
1
Oil filter
2
Collar on the oil filter
3
Shaped element
4
Sealing surface
5
Gasket
6
Guard ring
Procedure
Step
Activity
1
Loosen the oil filter (1) with a strap wrench or similar and un-
screw it until the collar (2) of the oil filter is at the same level as
the shaped element (3).
In this position, a valve releases the oil return into the crankcase
which allows the oil filter to empty.
2
Fully unscrew the oil filter after a waiting period of approx. 30
seconds.
Maintenance
4H50TIC
62
Operator's Manual
HATZ