Ultra Start 72 Series - Manual (Page 9)

SYSTEM PROGRAMMING - Menu 1
PAGE 9
INSTALL MANUAL TACH / TACHLESS LEARNING
* If the vehicle does not have a starter wire a manual tach learn must be
preformed. (See Page 8)
** If Tach does not learn check for proper connection on the starter wire,
ignition wire and at the Tach connection. If the connections are good, reset
the system and try again.
-For best results connect the Tach wire to a fuel injector wire.
*** If the vehicle does not start when the remote starter is activated, the park
lights will flash a diagnostic code. (See Diagnostic Chart).
****If the vehicle still does not start, check all connections and check for a
factory installed Anti-Theft system. If the Anti-Theft prevents the vehicle from
starting the remote start will flash the park lights 7 times. The system does not
have to be Tach learned if this happens, simply start the vehicle with the key
and let it run for 5 seconds then turn off.
TACH NOTES
72 SERIES