Elitegroup G731 - Manual (Page 75)

Driver Mode
This define the two status of Single, Mirror and Multi Monitor
(when an external monitor is connected to your notebook
computer).
When the "Single" is selected, the display can only
be seen on the notebook computer LCD, VGA or
TV panel.
When the "Mirror" is selected, you can display
different combination between the LCD, VGA or
TV display.
Display Combination
This applies to the display that you prefer to use.
REMINDER: The "Auto" tab will serve as additional
function of the "Mirror" and "VGA" respectively by removing
the check mark under the "Display Combination"
selection field.
Select the "VGA" if you want the picture to only
display on the monitor screen.
Select "LCD" if you want the picture to only
display on the notebook computer screen.
NOTE: Use the [Fn] + [F12] hot keys to toggle
between the LCD and external monitor display.
If you prefer to use only one display in operating your
system, press the [Fn] + [F12] hot keys will shut down
the LCD display, external monitor display or both at this
random order.
59