Elitegroup G731 - Manual (Page 10)

max. 35 °C.
16.
17.
The sound pressure level at the operators position
according to IEC 704-1: 1982 is equal or less than 70
dB(A).
Power Cord Requirements
The power cord set used with the AC adaptor must meet the
requirements of the country where you use the AC adaptor,
whether it is 100-120 or 200-240 Vac. The following
information explains the requirements for power cord set
selection.
The cord set must be approved for the country in
which it is used.
The appliance coupler must have a configuration
for mating with a CEE22/EN6032/IEC 320
appliance inlet.
A. For U.S. and Canada:
The cord set must be UL Listed and CSA Certified.
The minimum specifications for the flexible cord
are No. 18 AWG.
B. For Japan:
All components of the cord set must bear a “ T ”
mark and registration number in accordance with
the Japanese Dentori Law.
The minimum specifications for the flexible cord
are .75m ㎡ conductors.
C. For Other Countries:
The cord set fittings must bear the certification
mark of the agency responsible for evaluation in a
specific country.
The flexible cord must be of a HAR (harmonized)
type H05VV-F.
viii