Elitegroup G731 - Manual (Page 44)

When there is only one minute of battery charge remaining, the
Notebook will suspend to the HDD and power off. You should
connect AC power and resume to save your work.
Small Battery for the Real Time Clock
There is a small built-in battery pack that supplies power to the
system in order to maintain certain system information while
the power is off. If the Notebook is left without a power source
for long period of time, this battery will be exhausted and
system information will be lost.
Warning
:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer's instructions.
Never remove the battery pack while the power is on as
this may result in data loss when the system loses
power.
Resetting the System
After installing a software application package, you may be
prompted to reset the system to load the changed operating
environment. To reset the system, or “reboot,” press the [Ctrl]
+ [Alt] + [Delete] keys simultaneously. This is known as
“warm boot.” This key combination acts as “software” reset
switch when you encounter hardware or software problems,
which lock up the Notebook.
If this key combination does not shut down the Notebook, you
can reset the Notebook by using the Notebook’s power button.
Should the Notebook lock up for some reason, pressing this
button powers the Notebook off.
28