Power saving modes, The battery power system, Removing the battery pack – Elitegroup G731 User Manual
Page 41

CAUTION:
Always disconnect all telephone lines from
the wall outlet before servicing or disassembling this 
equipment. To reduce the risk of fire, use only No. 26 AWG 
or larger telecommunication line cord. 
Power Saving Modes
This section contains information on the Notebook’s power 
system, including the AC Adapter, the battery system, 
recharging the battery, and tips for conserving battery power. 
The power system is comprised of two parts, the AC Adapter 
and the battery system. The AC Adapter converts AC power 
from a wall outlet to the DC power required by the computer. 
The Battery Power System
A fully charged pack will provide approximately 1 hour and 10 
minutes (for 59.2Whr) or 2 hours (for 88.8Whr) of battery life 
depending on your system configuration application it runs. 
Before using the computer on battery power for the first time, 
check the battery status icon on the Windows Toolbar to make 
sure the battery is fully charged. 
See Battery Status later in this section for a description and 
explanation of the Windows Battery icon. Charging the battery 
takes about 3 hours to charge when the system is in off state. If 
possible, always charge the battery completely. 
Removing the Battery Pack
To remove the battery pack from its compartment, please refer 
to Chapter Two, Inserting and Removing the Battery Pack. 
25
