Loading a disc – Elitegroup G731 User Manual
Page 38

• 12.7mm height
Precautions for Handling CD-ROM/DVD-ROM/Combo
Discs
• Always hold the disc by the edges, avoid touching the
surface.
• Use a clean, dry, cloth to remove dust, smudges, or
fingerprints. Wipe from the center outward.
• Do not write or place objects on the surface of the disc.
• Store discs in a cool dry place not to damage the disc.
• Do not use benzene, thinners, or cleaners with detergent.
Only use CD-ROM/DVD-ROM cleaning kits.
• Do not bend or drop the discs.
Loading a Disc
To play a CD disc, follow the instructions listed below.
1.
2.
3.
1.
2.
3.
Push the CD-ROM/DVD-ROM/Combo eject button on
the CD drive door. Gently pull the tray all the way out.
Carefully lift the CD-ROM/DVD-ROM/Combo by the
edges and make sure the shiny surface is face down (the
side with no writing on it). Carefully insert the CD-ROM
onto the tray. Push the CD-ROM/DVD-ROM down
gently so that it snaps onto the center ring.
Push the tray back into the drive.
To remove a disk, do the following:
Check the LED display and make sure that the computer
is not accessing the CD-ROM/DVD-ROM drive.
Push the eject button and pull the tray all the way out.
Carefully pick up the CD disk by the edges and – while
pressing down on the center ring – remove the CD-
ROM/DVD-ROM/Combo from the tray.
22