Anthro Elevate Original Corner Assembly Instructions - Manual (Page 4)

4 Questions? Call us at 800.325.3841 or visit anthro.com. We’re happy to walk you through the assembly!
STEP 7
Assemble the Corner Leg Assembly and Install
ƒ Align a leg with the inside of the Corner Gusset so that
the Slot is facing the open corner and the cord goes to
the inside. Attach using eight Socket Head Cap Screws.
ƒ Repeat for the second leg.
ƒ Align the Corner Leg Assembly with the hole array on
the Top. Make sure that the cords are to the inside.
Secure the Leg Assembly to the Top Assembly using
1" Button-hd PB Screws.
STEP 6
Assemble the Outside Legs
ƒ Align a leg with the opening on the base tube so that the
welded slot bracket on the legs is facing the hole on the base
tube and that the cord comes out the top.
ƒ Attach with four Socket Head Cap Screws.
ƒ Repeat for the other leg.
ƒ Align each shelf gusset with a leg as shown so that the
side of the gusset doesn't block the cord.
ƒ Attach each shelf gusset to a leg with four Socket
Head Cap Screws.
20mm Socket Head Cap Screw
325-5272-00
Shelf Gusset (X) Shelf Gusset (Y)
Rear
Front Front
20mm Socket Head Cap Screw
325-5272-00
Slot Slot
Slot
1” Button Hd PB Screw
325-5580-00