Anthro Fit Adjusta Unit 30/36/48 Assembly Instructions - Manual

R
Questions? 1-800-325-3841
Thank you for buying our Products!
Please return the enclosed Registration Card to receive our product
updates, new catalogs, and sale flyers.
Anthro Corporation Technology Furniture ®
10450 SW Manhasset Drive
Tualatin, Oregon 97062
anthro.com
Anthro Corporation Technology Furniture ® 10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com
SAVE THESE INSTRUCTIONS! Rev. C January 2006
Hello! Thank you for choosing Anthro.
Before beginning assembly of your Adjusta Unit, take a moment to review the parts listed on the next page
to verify that your shipment is complete. Please review the assembly instructions of all Anthro products you
purchased and are planning to include in this installation, prior to beginning this assembly.
30”/36”/48” wide Adjusta Unit
Assembly Instructions
1-800-325-3841
To make the assembly of your Adjusta Unit even easier, we have included all of the required tools. The handy
Hex Driver Bit can be used in your electric drill in place of the Hex Driver.
Your Adjusta Unit is heavy! A second
person will make this assembly procedure much easier.
Hex Driver 5 /
32
” ............................................................ 375-5000-00
Hex Driver Bit 5 /
32
” ..................................................... 375-5003-00
Hex Key 5 /
32
” ................................................................. 375-5016-00
Hex Key 3 /
16
” ................................................................. 375-5028-00
3-Way Wrench ............................................................. 225-5196-03
8 oz. Rubber Mallet ..................................................... 375-5022-00