Nexo GEO T - Manual (Page 18)

Page 18/67 GEO T RIGGING PROCEDURE
4.1.3 Contacts
Correct training is fundamental to safe practise when working with loudspeakers flying systems. NEXO
recommend that users contact local industry associations for information on specialist course.
Information for International training agencies can be obtained by contacting either:
The Production Services Association
(PSA),
School Passage,
Kingston-upon-Thames,
KT1 SDU Surrey,
ENGLAND
Telephone: +44 (0) 181 392 0180
Rigstar Training and Testing Center
82 Industrial Dr. Unit 4
Northampton, Massachusetts 01060 U.S.A.
Phone: 413-585-9869 -- Fax: 413-585-9872
[email protected]
ESTA
Entertainment Services & Technology Association
875 Sixth Avenue, Suite 1005
NEW YORK, NY 10001 USA
Phone: 212-244-1505 – Fax: 212-244-1502
[email protected] - www.esta.org
4.2 General Description
Each GEO T Array Module includes an individual rigging system, which is mounted at the NEXO
factory.
Six BLGEOT12-30 push-pins are provided with the GEO T4805.
Four BLGEOT12-30 push-pins are provided with the GEO T2815.
All holes on GEO T side rigging plates are 12mm diameter, matching the push-pins which are 12mm
diameter x 30mm length.
IMPORTANT
Provided push-pins are specifically rated.
Never use other push-pins than the ones provided with the GEO T components
GEO T2815 GEO T4805