PreSonus FireStudio Lightpipe - Manual (Page 25)

CONTROLS & CONNECTIONS
22 | PreSonus 2008
 Device Window Button Opens the Device Window
Click on this button to open the FireStudio Lightpipe Mixer.
To give your FireStudio Lightpipe a custom name, double-click on the default
label (FireStudio Lightpipe) to open a text field. When you have finished entering
your custom name, hit the Enter key.
 File Menu Opens and Closes Launcher and Device Windows
From the File menu of the Launch Window, you can open and close both
windows, as well as quit the Universal Control application.
 Close Window. Closes just the Launcher window.
 Show All Devices. Opens the Device window for all of the connected
FireStudio-family interfaces.
 Close All Devices. Closes the Device window for all of the connected
FireStudio-family interfaces.
 Quit. Quits the Universal Control application.
 Settings: Check Firmware Automatically Scans Your FireStudio Lightpipe and Updates the Firmware
A firmware updater is built into the Universal Control application. Periodically,
a driver update will require that the firmware on your FireStudio Lightpipe be
updated. Whenever you install an update for the Universal Control or add a new
FireStudio-family product to your system, you should use this feature to ensure
that the firmware is up to date. If the firmware needs to be updated, the update
application will launch automatically.
 Settings: Run at Startup Launches the Universal Control Application Automatically on Startup (Windows
PCs Only)
When this is enabled, the Universal Control application will automatically launch
each time you boot your Windows PC.

Settings: Meter Style Provides options for Metering in the Device Window.
From the Launcher Window, you can determine how your Inputs and DAW
streams are metered in the Device Window.
 Post-Fader. Displays the metering for any signal after it has been
boosted or attenuated by the channel fader. By default, all metering is
pre-fader position.
 Peak Hold. When this is enabled, the clip indicator on any given
channel will remain illuminated until manually cleared, even if the
signal is no longer clipping. This is enabled by default.