Stuart Turner Techflo Turbo 15TNH - Manual (Page 3)

- 3 -
CHECKLIST
Item Description Qty Item Description Qty
Pump 1 Hose with isolating valve 2
Hose 2
Your product may vary slightly from the picture above.
PRE-INSTALLATION CHECK
The pressure vessel is supplied as a separate
item, and will need to be fitted prior to installing the
pump.
Install the pressure vessel ensuring the ‘O’-ring
seal is in place and hand tighten.
Note: Do not overtighten pressure vessel.
After fitting the pressure vessel ensure the
retaining nut at the base of the assembly is still
hand tight and the cable connecting the pressure
switch has not been strained during the assembly.
A
B
C
A
C
C
B
B
Fig. 1
Fig. 2
Pressure vessel
Sealing Washer