Stuart Turner Techflo Turbo 15TNH - Manual (Page 13)

- 13 -
Cont ...
4.24 Cable Gland Fitting Instructions:
To enable correct assembly of the cable gland the ‘O’-ring (Fig. 14 item 1) must
be placed over the cable before the clamping insert (Fig. 14 item 2) can be
tightened.
Note: Cable diameter range:- 6.5 mm to 9.5 mm.
4.25 Supply Cord Extension:
The pumps are fitted with a supply cord to the following specification:-
All models . . . . . . . . . . . . . . . . . . HO5VV-F3 G 0.75 mm² - 6 Amp rated cable.
If the supply cord is to be extended, a cord of the same specification should
be used. Any connections or junction boxes used should be specifically suited for
the application and installed in accordance with the manufacturers instructions.
1
2
Fig. 14