Stuart Turner Techflo Turbo 15TNH User Manual
Page 15
- 15 -
Cont ...
5.14
Starting:
a) Ensure all outlets are closed, turn power supply ‘on’ - pump will start,
pressurise the system then stop.
b) Open and close all outlets in turn associated with the pump, allowing water to
flow from each outlet until all air is purged. As each outlet is opened and
closed, the pump will start and stop respectively.
c) Any tap or control valve within the system when opened and closed will now
turn the pump on/off. If this is confirmed to be the case, the system is now
operating
correctly.
d) Carefully check pump and pipework for leaks whilst pump running and
stationary before leaving the installation unattended.
5.15
For Further Technical Support: Phone the Techflow Technical Helpline on
01444 258017. Our staff are trained to help and advise you over the phone.