Chapter 1 overview, 1 overview of gatedx-p functions, Chapter 1 overvew – Yokogawa DAQWORX User Manual
Page 7: 1 overview of gatedx-p functions -1, 1 overvew of gatedx-p functons

1-1
IM WX1-02E
1
2
3
Index
Overv
ew
Chapter 1
Overvew
1.1
Overvew of GateDX-P Functons
Gate-DXP is a software program that acquires data from the DX100P/DX200 and
transfers it to DAQLOGGER or Remote Monitor. Using GateDX-P allows you to monitor
data on DAQLOGGER or Remote Monitor that is measured on the DX100P or DX200P.
Yokogawa’s DAQLOGGER is a software program that allows users to open a connection
from their PC to various kinds of Yokogawa recorders (the mR, VR, DARWIN, DX, MV,
and CX) and perform data logging and monitoring.
Yokogawa’s Remote Monitor is application software that enables monitoring of data
logged by recorders or data logging software.
Features
• Runs as a Windows application.
• Up to 16 DX100P/DX200Ps can be linked.
• Measurement can be performed at intervals of up to 0.5 seconds
*
.
* However, DAQLOGGER’s shortest interval is 1 second. Also, the maximum speed of 0.5
seconds may not be attainable depending on the amount of data being read, the response
time of the device, and the communication speed.