Yokogawa Standalone MW100 - Manual (Page 3)

3
1. Before Using the Software
1.1. Explanation of Functions
Overview of Functions
A one-to-one connection can be made between the MX118-CAN-M30 CAN Bus Input Module
(hereinafter, the MX118) and a PC allowing specific settings to be entered on the MX118.
The sofware enables you to enter MX118 CAN bus communication settings, enter conditions for
extracting measured data, save and load settings, print lists of settings, and perform other functions.
1.2. MX118 Part Names and Functions
PC
MW100 main module MX118
Serial port for settings
Dip Switch
Switches operation mode, sets
baud rate, and turns terminator
ON/OFF.
STATUS LED
Operation status
ACTIVE LED
Communication status
Serial Comm. Connector
For entering MX118 settings.
CAN Bus Comm. Connector
Connects to the CAN bus.