Yokogawa Standalone MW100 - Manual (Page 13)

13
CAN Bit Rate (bps)
You can set the speed of CAN bus communication. Select a bit rate from the following values.
If you select Other, the detailed setting screen is displayed automatically.
For the default bit timing in the various bit rates, see appendix 4.2, “Default Bit Timing Values.”
10 Kbps, 20 Kbps, 33.3Kbps, 50 Kbps, 62.5 Kbps, 83.3 Kbps, 100 Kbps, 125 Kbps,
250 Kbps, 500 Kbps, 800 Kbps, 1 Mbps, Other
CAN Bit Timing Advanced Settings
Click the More button to display detailed CAN bus communication settings.
Here, you can select a bit timing from a fixed range for the selected bit rate.
If you change the CAN bit rate, the bit timing reverts to the default value.
For the available settings for the various bit rates, see appendix 4.1, “List of Bit Timing Values.”
Also, if you wish to set a bit rate or bit timing value other than the above, select Other under CAN Bit
Rate and enter the detailed settings.
When the details are displayed, the button text changes to Less. You can click the Less button to
hide the detailed settings.
[Less] button
Baud Rate Prescaler （BRP）
Time Quanta Count （TQC）
TSEG1（PRSEG + PHSEG1）
TSEG2（PHSEG2）
Re-Synchronization Jump Width （SJW）
Bit Sample Point （BSP）
Bit Rate