Yokogawa Standalone MW100 - Manual (Page 2)

2/17
Contents
1. Foreword
................................................................................................................................................ 3
2. System Reconfiguration ........................................................................................................................ 3
3. Setup ....................................................................................................................................................... 3
3.1. Setting Up the Measurement Operation ........................................................................................ 3
3.2. Setting Up Measurement Channels ............................................................................................... 3
3.3. Setting Up Filters ............................................................................................................................ 3
4. Communication Commands ................................................................................................................. 3
4.1. Setting the Input Range .................................................................................................................. 3
5. PC Software ............................................................................................................................................ 3
6. CAN Bus Module (MX118-CAN-M30) Specifications ........................................................................... 3
6.1. Model Name ..................................................................................................................................... 3
6.2. Module Specifications .................................................................................................................... 3
7. Switching between Setting and Measurement Mode .......................................................................... 3
7.1. Measurement Mode (STATUS LED Lights) .................................................................................... 3
7.2. Setting Mode (STATUS LED Blinks at Approximately One-Second Intervals) ........................... 3
7.2.1. Setting Mode Communication Specifications ....................................................................... 3