Yokogawa ISC40 Inductive Conductivity Sensor - Manual (Page 22)

IM 12D8J2-E-E
22
8 EU DECLARATION OF CONFORMITY
We: Yokogawa Europe B.V.
Euroweg 2, 3825 HD Amersfoort
The Netherlands
herewith declare under our sole responsibility that the products, model: ISC40G and ISC40S
further specified with model suffix- and option codes: As listed in Annex-1 in this document
are manufactured in accordance with the requirements for CE-marking of products as
stated in EC Decision:
768/2008/EC on a common framework for the marketing of products
by applying the following standards:
EN-ISO 9001: 2008 Quality management systems - Requirements
Products ISC40G and ISC40S are:
• In compliance with the essential requirements of the specific product legislation:
- Pressure Equipment Directive 97/23/EC (PED)
As amended by Regulation (EC) no. 1882/2003, by applying:
Article 3.3: Sound Engineering Practice
• Produced according to appropriate quality control procedures.
Product ISC40S is:
• In compliance with the essential requirements of the specific product legislation:
- Potentially explosive atmospheres (ATEX) Directive 94/9/EC
As amended by Regulation (EC) no. 1882/2003
by applying the following standards:
EN 60079-0: 2009 Explosive atmospheres – Part 0: Equipment – General
requirements
EN 60079-11: 2007 Explosive atmospheres – Part 11: Equipment protection by
intrinsic safety “i”
EN 60079-26: 2007 Explosive atmospheres – Part 26: Equipment with equipment
protection level (EPL) Ga
The provisions fulfilled are:
II 1 G Ex ia IIC T4...T6 Ga
Number of the EC-type Examination Certificate: DEKRA 11 ATEX 0063 X
Name of the notified body: DEKRA Certification B.V.
Identification number of the notified body: 0344
Address of the notified body: Utrechtseweg 310, 6812 AR Arnhem, The Netherlands
The CE-mark has been affixed on the product in 2000 for the first time.
Amersfoort, 1 October 2012
H. Leijten
General Manager
Yokogawa Process Analyzers (YPA)
Yokogawa Europe B.V.