Yokogawa ISC40 Inductive Conductivity Sensor - Manual (Page 11)

IM 12D8J2-E-E
11
CSA
Certificate no. : 2447837 IS, Class I Div. 1, GP A, B, C, D T4…T6
Master Contract no 182892
Electrical data : Sensor output circuits (permanently connected cable)
connected to a certified intrinsically safe circuit with the
following maximum values: Uo = 19.1 V; Io = 170 mA;
Po = 0.8 W; Co≥ Ci + Ccable; Lo≥ Li + Lcable
or
certified intrinsically safe Yokogawa Inductive Conductivity
transmitter model FLXA21 series, model ISC202S series or
model IC200S series
Ambient : T6 for Tamb. -30°C to 40°C
temperature range T5 for Tamb. -30°C to 95°C
T4 for Tamb. -30°C to 130°C, depending on sensor body
material
Note: Intrinsically safe when connected as per Control Drawing FF1-K1244QY (see fig. 2)
FM
Certificate no. : 3046320 IS, Class I, Div. 1, Groups A, B, C, D T4…T6
Electrical data : Sensor output circuits (permanently connected cable)
connected to a FM approved intrinsically safe apparatus
meeting the entity parameters of the ISC40S:
Uo≤ 19.1 V; Io≤ 170 mA; Po≤ 0.8 W;
Co≥ Ci + Ccable; Lo≥ Li + Lcable
or
certified intrinsically safe Yokogawa Inductive Conductivity
transmitter model FLXA21 series, model ISC202S series or
model IC200S series
Ambient : T6 for Tamb. -30°C to 40°C
temperature range T5 for Tamb. -30°C to 85°C
T4 for Tamb. -30°C to 85°C, depending on sensor body
material
Note: Intrinsically safe when connected as per Control Drawing FF1-K1244QX (see fig. 3)
2.7 Shipping details Package size (LxWxH)
ISC40*-**-*-03 (05) : 350 x 270 x 50 mm (13.8 x10.6 x 2.0 inch)
ISC40*-**-*-10 (15, 20) : 320 x 240 x110 mm (12.6 x 9.5 x 4.3 inch)
Package weight (app.)
ISC40*-**-*-03 : 1.0 kg (2.2 lbs)
ISC40*-**-*-05 : 1.3 kg (2.9 lbs)
ISC40*-**-*-10 : 1.6 kg (3.5 lbs)
ISC40*-**-*-15 : 2.1 kg (4.6 lbs)
ISC40*-**-*-20 : 2.5 kg (5.5 lbs)
2.8 Environmental conditions
Storage temperature : -30°C to 50°C (-22°F to 122°F)
Water proof : IP67 (conform IEC 60529), also in combination with the
preferred Yokogawa process connections
2.9 Process connections
Process connections are made in combination with a variety of adapters and fittings,
which are available in AISI 316 SS, PVC or PVDF (see relevant sections in this manual).