Yokogawa EJA110A - Manual (Page 18)

IM 01C21B01-01E 2-10
2. HANDLING CAUTIONS
(3) Installation
WARNING
• All wiring shall comply with local installation
requirement and local electrical code.
• There is no need of the conduit seal for both of
Division 1 and Division 2 hazardous locations
because this product is sealed at factory.
• In case of ANSI 1/2 NPT plug, ANSI hexagonal
wrench should be applied to screw in.
(4) Operation
WARNING
• OPEN CIRCUIT BEFORE REMOVING
COVER. INSTALL IN ACCORDANCE WITH
THIS USER’S MANUAL
• Take care not to generate mechanical sparking
when access to the instrument and peripheral
devices in hazardous locations.
(5) Maintenance and Repair
WARNING
The instrument modification or parts replacement
by other than authorized Representative of
Yokogawa Electric Corporation is prohibited and
will void the certification.
(6) Name Plate
᭹ Name plate
: Refer to USER'S MANUAL
᭹ Tag plate for flameproof type
᭹ Tag plate for intrinsically safe type
᭹ Tag plate for type n protection
᭹ Tag plate for flameproof, intrinsically safe type,
type n protection, and Dust
F0298.EPS
D T65 Њ C (Tamb.: 40 Њ C), T85 Њ C (Tamb.: 60 Њ C),
and T105 Њ C (Tamb.: 80 Њ C)
MODEL: Specified model code.
STYLE: Style code.
SUFFIX: Specified suffix code.
SUPPLY: Supply voltage.
OUTPUT: Output signal.
MWP: Maximum working pressure.
CAL RNG: Specified calibration range.
DISP MODE: Specified display mode.
OUTPUT MODE: Specified output mode.
NO.: Serial number and year of production
*1 .
TOKYO 180-8750 JAPAN:
The manufacturer name and the
address
*2 .
*1: The third figure from the last shows the last one
figure of the year of production. For example, the
production year of the product engraved in “NO.”
column on the name plate as follows is 2001.
The year 2001
12A819857 132
*2: “180-8750” is a zip code which represents the
following address.
2-9-32 Nakacho, Musashino-shi, Tokyo Japan