Aiwa ADC-M105 - Manual (Page 11)

Notes on the disc magazine
• Be sure to place a disc on the disc tray with the
label side up. If a disc is not set properly, it may
cause damage to the unit.
• The disc tray may be taken off from the magazine
if you pull the tray forcibly. If the tray is taken
out, put it back into the magazine as illustrated.
Be sure that both ends of the tray are aligned to
the grooves of the magazine correctly.
ENGLISH
10
Disc magazine
Disc tray
Disc
Disc tray
SPECIFICATIONS
Compact disc changer
System Compact disc digital audio
system
Frequency response 5 Hz – 20 kHz
Wow and flutter Below measurable limit
Signal to noise ratio 91 dB or more
Outputs Line output (for changer
connector only)
Operating temperature
–10 °C to 55 °C
Dimensions 254
Ч
83
Ч
173 mm (w/h/d)
(10 Ч 3 3 /
8
Ч 6 7 /
8
in.)
Weight 2.1 kg
(4.62 lbs.)
Power requirement 12 V DC car battery
(negative ground)
D/A converter 1 bit DAC, 8 times over
sampling
Sampling rate 44.1 kHz
Disc size 120 mm
Supplied accessories Disc magazine (1)
Mounting kit (1 set)
Connecting cable (5 m)
(16.4 ft.) (1)
Design and specifications are subject to change without
notice.
Disc
magazine
Disc tray
Groove
Groove
• Be sure all the trays are set in the magazine
when using the unit.
01ADCM105.YU.E 01.1.31, 3:53 PM 11