Pfister GT34-4NSS - Manual (Page 6)

E
N
G
L
IS
H
ENGLISH
22
23
21
20
22 HANDLE REMOVAL
Turn off water before proceeding!
Carefully pry off handle button (22A) using
a small screwdriver or blade. Using a 3/32” Allen wrench, loosen set screw (22C)
and remove Lever Handle (22B). Reassemble handle by reversing steps.
23 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet.
Remove handle – see above. Remove the Dome Cap (23A) by unscrewing
counter clockwise. Using pliers, unscrew the Retainer Ring (23B). Carefully
remove the Cartridge (23C) by pulling it straight up and out. Reassemble
faucet by reversing steps.
MAINTENANCE & CARE
21 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (21A). Turn Valve
(21B) on and allow both hot and cold water to run for at least one minute each.
While water is running, check for leaks. To clean the aerator, disassemble Aerator
Housing (21A) by separating the Aerator Shell (21C), Basket (21D), and Washer
(21E). Once parts have been cleaned, reassemble by reversing steps.
20 SIDE SPRAY OPERATION
(For products with side spray). The Side Spray (20A) can be pulled forward
to spray water in any direction. To activate the Side Spray, press the Toggle
Button (20B) located on the back of the Side Spray (20A).
6
ENGLISH
22A
23A
23B
23C
22B
22C
21A
21C
21D
21E
21B
20A
20A
20B