beautypg.com

SaltDogg SCH096 Series Self-Contained Hopper Spreader User Manual

SaltDogg For the car

background image

Quality since 1946

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • buyersproducts.com

Quality since 1946

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • buyersproducts.com

Installation Instructions

S

Se

ellff--C

Co

on

ntta

aiin

ne

ed

d H

Ho

op

pp

pe

err S

Sp

prre

ea

ad

de

err

TABLE OF CONTENTS

General Information

1

Safety Precautions

2

Warranty Information

3

Installation Instructions

3

Spreader Operation

5

Spreader Maintenance

7

Repair Parts & Drawings

8

Note: This manual applies to spreaders equipped with
Tecumseh Formula XL/C 10.0 HP. engine, serial number
2810 and above.

GENERAL INFORMATION

Spreader Model Numbers:

SCH096C - 8’ spreader w/ standard length spinner/chute,
(carbon steel).
SCH096SS - 8’ spreader w/ standard length spinner/chute,
(stainless steel).
SCH096CX - 8’ spreader w/ extended length spinner/chute,
(carbon steel).
SCH096SSX - 8’ spreader w/ extended length spinner/chute,
(stainless steel).

Spreader Specifications:

Overall Length:

113 inches

Overall Width:

50-3/4 inches

Overall Height:

32-1/2 inches

Empty Weight (excludes accessories, fuel, and salt/sand):

Carbon Steel - 820 lbs.
Stainless Steel - 620 lbs.

Capacity Struck:

1.8 cubic yards

Capacity Rounded:

2.1 cubic yards

Vehicle Requirements:

3/4 or 1 ton pick-up truck above 8500# GVWR.

CAUTION! Do not overload vehicle beyond the vehicle
GVWR or GAWR. Check the vehicle’s load rating certifica-
tion sticker for maximum vehicle capacity.

Average Material Weights:

MATERIAL

WEIGHT (POUNDS PER CUBIC YARD)

#1 Rock Salt

950

#2 Rock Salt

1,215

Coarse Sand - Dry

2,565

Coarse Sand - Wet

3,240

Note: To calculate the total spreader weight (including ice
control material); add the empty spreader weight plus the
ice control material and spreader accessories.

Hopper Storage Capacity

Recommended Fastener Torques:

Maintain all fastener torques as shown in the following
table. Failure to do so may cause injury to persons.

SAE GRADE 2

SAE GRADE 5

ft-lbs

ft-lbs

1/4-20

6

9

5/16-18

11

18

3/8-18

19

31

3/8-24

24

46

7/16-14

30

50

1/2-13

45

75

9/16-12

66

110

5/8-11

93

150

1.8 CU YD

0.5 CU YD

1.0 CU YD

12”

19”

27”