SaltDogg 1450969SSH Municipal-Sized Hydraulic Hopper Spreader User Manual
Instruction manual
1
TM
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • saltdogg.com
Instruction Manual
Municipal-Sized Hydraulic
Powered Stainless Steel Hopper
Spreaders
—continued inside
IMPORTANT
The Cab to Axle/Tandem dimensions are only guidelines.
Consult federal, state and local weight laws and chassis
manufacturer’s ratings to ensure neither government weight
restrictions, nor GVWR and GAWRs are exceeded.
Table of Contents
Warranty Information ..............................back cover
General Information .................................................1
Safety Precautions ................................................1-2
Installation Instruction .........................................2-8
Spreader Operation ...............................................2-8
Spreader Maintenance ..........................................2-8
Repair Parts .......................................................... 6-8
Optional Equipment .................................................5
General Information
1450757SSH
143"
82"
57"
50:1
2310 lbs.
7.0
1425757SSH
143"
82"
57"
25:1
2310 lbs.
7.0
1450863SSH 143"
82"
63"
50:1
2457 lbs.
8.3
1425863SSH
143"
82"
63"
25:1
2457 lbs.
8.3
1450969SSH 143"
82"
69"
50:1
2550 lbs.
9.6
1425969SSH 143"
82"
69"
25:1
2550 lbs.
9.6
model
overall
gear box
empty
capacity
no.
length
width
height
ratio
weight
cubic yards
1. Recommended Vehicle Requirements
Buyers Municipal-Sized Hopper Spreaders are
intended for spreading abrasives and/or chemi-
cals, primarily for ice and snow control. They are
intended for installation on truck chassis or dump
bodies with GVWR 26,000 lbs. Spreaders are
intended to be mounted on trucks with
Cab To
Axle/Tandem Dimension minimum of 84 inches.
2. Average Material Weights
MATERIAL WEIGHT (POUNDS PER CUBIC YARD)
#1 Rock Salt - 950
#2 Rock Salt - 1,215
Coarse Sand - Dry 2,565
Coarse Sand - Wet 3,240
3. Recommended Fastener Torques
Maintain all fastener torques as shown in the fol-
lowing table. Failure to do so may cause injury to
persons.
SAE GRADE 2
SAE GRADE 5
ft-lbs
ft-lbs
5/16-18
11
18
3/8-18
19
31
3/8-24
24
46
7/16-14
30
50
1/2-13
45
75
9/16-12
66
110
5/8-11
93
150
4. Gearbox Oil
The gearbox of the spreader is filled with ISO VG
460 synthetic gear lubricant at the factory. This
lubricant has operating temperature -40º C to
150ºC.
Shown with Optional
LB8663SST Lightbar
&
LS4 Liquid Spray System