American Dynamics Tyco 8 - Manual (Page 38)

Restoring factory defaults
6-2 Installation Guide
Restoring factory defaults on the IPSDU8
The Restore button must be used in conjunction with the Reset button to restore the IPSDU8 to
the factory defaults.
Note
The restore procedure only resets the web configuration pages to default. To reset the SDU8 to
factory defaults follow the instructions in the SpeedDome
® Ultra 8 Camera Dome Operator’s
Guide, 8200-0600-01.
Procedure 6-1 Restoring the IPSDU8 factory defaults
Caution
Loss of configuration
Restoring the factory defaults will result in all saved configuration settings being removed and
the IPSDU8 being restored to the factory settings.
1 Ensure that power is being applied to the IPSDU8 from a power supply.
2 Press and hold the Restore button.
3 Press and release the Reset button.
4 Once the power LED starts flashing rapidly release the Restore button.
5 Refer to the Configuration and User Guide 8200-0885-02 to restore the configuration settings
from a backup configuration file.