American Megatrends MAN-STOR-ITX27-CLI - Manual (Page 15)

Chapter Two: Command Set 9
Alert Configuration
These commands configure the way alerts are generated.
Command Argument Description
get alert -t/--type snmp
For example:
get –t snmp alert Gives the SNMP alert
configuration.
get alert -t/--type email
For example:
get –t email alert Gives the Email alert
configuration.
delete alert -t/--type snmp
-v/--value
-x/--xml alert
For example:
delete -t snmp -v 10.0.3.155 -v 10.0.0.203 -x alert Deletes the SNMP specified
destination from the alert
configuration.
delete alert -t/--type email
-v/--value
-x/--xml alert
For example:
delete -t email -v [email protected] -v
[email protected] -x alert Deletes the specified email address
from the alert configuration.
set alert -t/--type snmp
-e/--enable or
-d/--disable
-v/--value
-x/--xml
For example: set –t snmp –e –v 1:public:10.10.10.5
-x alert Configures SNMP alerts.
Note:
ation>
For example:
<1:public:10.0.0.79>
set alert -t/--type email
-e/--enable or
-d/--disable
-v/--value
-s/--emailserver (IP address)
-F
-x/--xml
For example: set -t email -e -v
1:1:[email protected] -s 10.0.0.79 -F ami.com -x
alert
Configures Email alerts.
<1:1:[email protected]>
Language
0-Unknown
1-English
2-Japanese
3-Korean
4-Chinese
Alert Mask:
1 - Information
2 - Warning
4 - Fatal
Any combination of the three alert
masks up to a maximum of seven
levels.