Ramsey Winch HD-234 - Manual (Page 14)

13.Press bearing (item
#15) onto worm (item
#14) Note: Be sure that
thick shoulder of bear-
ing’s outer race (side
with manufacturer’s
name and part number)
is out, away from worm
threads. Press bearing
and worm into gear
housing. Slip gasket (item #30) onto bearing cap (item #4). Use four cap-
screws (item #18) to secure cap to gear housing. Tighten capscrews to 8
ft-lbs. (10.8 Nm) each.
14.Press bearing (item #15) onto
worm and into gear housing.
Note: Be sure that thick shoul-
der of bearing’s outer race (side
with manufacturer’s name and
part number) is out, away from
worm threads. Attach bearing
cap (item #4) to gear housing.
Use four capscrews (item #18)
to secure. Tighten capscrews
to 8 ft-lbs. (10.8 Nm) each.
Tap key (item #12) into key-
way.
14
15
30
14
18
4
30
15
12
4
18