Door assembler & installer information, Door and hardware considerations, For installing the on hand – ODL ON HAND In-Door Storage and Communication System User Manual
Page 17: System kit into a door, Flush solid core doors the on hand, System is designed to fit in any 1, Door cut-out use only with flush solid core doors, Top of door
17
Door Assembler & Installer Information
Door and hardware considerations
For installing the ON HAND
™
system kit into a door.
Flush solid core doors
The ON HAND
™
system is designed to fit in any 1
3
/
8
" thick, 28"
or wider, flush, solid-core door. To prepare for installation, cut a
19.063"(19
5
/
8
" +
1
/
16
")
w x 50.688"(50
11
/
16
" +
1
/
16
") h opening located
20.375"(20
3
/
8
" +
1
/
16
") from the bottom of door to accommodate the
ON HAND system. (see below)
Handle restrictions
Because the cabinet projects 2
7
/
8
" from the door face, do not use lever-
style handles on the cabinet side of 28" or 30"wide doors. Lever handles
may work on 32" and wider doors. Use any style handle on the activity
panel side of door.
Hinges and screws
Hinges should be mortised into the door and jamb. Use only hinges
and screws that accommodate the added 69 pounds of a fully loaded
ON HAND system (less the weight of the cutout section of the solid
core door).
.00 .020
.0 .050
DRAFT TOL. +.25
- .00
.000 .005
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
ANGLE TOL. .50
50.688±.063
19.063±.063
DIM A
20.375
PENDING
ECO ---
REVISION A.01 IS NOT RELEASED
THIS DRAWING IS FOR REVIEW ONLY.
ANY TOOLING OR SAMPLE ORDERS
REQUIRE PROD. ENG. MGR. SIGNATURE.
DRAWING APPROVAL
Prod. Engineer
QA Engineer
Mfg. Engineer
Tooling/Buyer
OK TO TOOL OR BUY SAMPLES
Prod. Eng. Mgr.
TOP OF
DOOR
BOTTOM OF
DOOR
DESCRIPTION
DIM A
REV
STATUS
30in DOOR CUTOUT
5.468
A.02 Development
32in DOOR CUTOUT
6.468
A.02 Development
36in DOOR CUTOUT
8.468
A.02 Development
DRAWING REVISIONS
ECO
REV
DESCRIPTION
CHG BY APPD BY
DATE
---
A.01
DEVELOPMENT
BH
TW
6/11/2012
---
A.02
ADDED DOOR ENDS, 20.375 DIM
BH
TW
6/11/2012
3D FILE NAME
Q
T
Y
DRAWN BY
REV.
QA APP
C
SIZE
DO NOT SCALE DRAWING
CONTROL DIMENSIONS
M
DWG. NO.
DESCRIPTION:
THIS DRAWING IS THE PROPERTY OF ODL
INCORPORATED AND EMBODIES
CONFIDENTIAL INFORMATION, TRADE
SECRETS INFORMATION AND/OR
KNOW-HOW WHICH IS THE PROPERTY
OF ODL INCORPORATED. BY
ACCEPTING THIS DRAWING, THE
RECIPIENT AGREES NOT TO PROVIDE,
OR OTHERWISE MAKE AVAILABLE THE
DRAWING, OR ANY INFORMATION OR
KNOW-HOW EMBODIED THEREIN, TO ANY
THIRD PARTY WITHOUT PRIOR
WRITTEN AUTHORIZATION
C COPYRIGHT 2011 ODL INCORPORATED
CRITICAL DIMENSIONS
ENG APP
THIRD ANGLE PROJECTION
OnHand Interior Door Cutout
DOOR CUTOUT
A.01
0
0
B
ONHAND
SCALE:1:16
SHEET 1 OF 1
BH
TW
6/11/2012
6/11/2012
FILE PRINTED:6/11/2012
BOTTOM OF DOOR
DOOR WIDTH
DIMENSION A
28"
4.468 OR 4
7
/
16
"
30"
5.468 OR 5
7
/
16
"
32"
6.468 OR 6
7
/
16
"
36"
8.468 OR 8
7
/
16
"
DIMENSION A
DOOR CUT-OUT
Use only with flush solid core doors.
NOTE
50.688
(50
11
/
16
+
1
/
16
)
20.375
(20
3
/
8
+
1
/
16
)
19.063
(19
5
/
8
+
1
/
16
)
TOP OF DOOR