ODL ON HAND In-Door Storage and Communication System User Manual
Page 11
11
With the "ridge" facing you and the logo on the bar
end right side up, slide bar back and over supports on
inside of cabinet.
1
Slide down to secure in place.
2
SUPPORT BAR – OPTION 1
Hooks are designed to hold light-weight objects.
Maximum load on support bar is 5 lbs.
Maximum load per hook is 1 lb.
NOTE
Installing to Hang Objects
The support bar can be installed as a hanger bar
with hooks to hang light-weight objects.
Lower hooks onto bar until they snap in place. Push
up to remove.
3
Hooks are designed to slide on the bar to desired
position.
4
Logo right
side up
Ridge
1
2
3
4
Lift and slide out to remove.
NOTE
Swinging metal objects have the potential to scratch
the cabinet back. Install a second support bar to prevent
objects from hitting cabinet back as shown. Order second
support bar separately.
TIP