Lincoln Electric IM10144 POWER WAVE S700 - Manual (Page 31)

B-5 OPERATION B-5
POWER WAVE ® S700
DESIGN FEATURES
• Designed for High Amprage, High Duty Cycle
Applications.
• Severe Duty Design for outdoor use (IP23 rating).
• iARC™ Digital Control – 90 times faster than the
previous generation, delivering a responsive arc.
• Fork lift access base design for ease of installation
or movement.
• Output range: 20 – 900 Amps.
• Coaxial Transformer Technology – gives reliable
high-speed operation.
• Passive Power Factor Correction – reliably gives
95% power factor for lower installation costs.
• 88% Efficiency rating – reduces electrical utility
costs.
• Seamless integration with Ethernet, DeviceNet and
ArcLink.
• Circuit breaker protected 10-amp, 115V auxiliary
power.
• F.A.N. (fan as needed). Cooling fan runs when the
output is energized, and for 5 minutes after arc is
extinguished.
• Thermal protection by thermostats with Thermal
Indicator LED.
• Built-in Line Voltage Compensation holds the output
constant over ±10% input voltage fluctuations.
• Electronic over current protection.
• Input over voltage protection.
• Utilizes digital signal processing and microprocessor
control.
• Simple, reliable input voltage changeover.
• Conforms to the IEC 60974-1 and GB15579-1995
Standards.
• Ethernet connectivity via RJ-45 connector.
• Potted PC boards for enhanced ruggedness/reliabil-
ity.
• ArcLink®, Ethernet and DeviceNet™
Communication – Offers remote process monitoring,
control and troubleshooting.
• True Energy™ - Measures, calculates and displays
instantaneous energy in the weld for critical heat
input calculations.
• Production Monitoring™ 2.2 – Track equipment
usage, store weld data, and configure limits to assist
in welding efficiency analysis.
• Check Point™ – is the newest data collection and
reporting technology available for the latest models
of the Lincoln Electric Power Wave
® family of
Welding Power Sources.