Lincoln Electric IM10144 POWER WAVE S700 - Manual (Page 30)

B-4 OPERATION B-4
POWER WAVE ® S700
K3279-1
K2230-1
K1543-xx
K1811-xx
Power Wave ® S700
Power Feed ® 10M Wire Feeder
Control Cable (5 pin – 5 pin) - power source to wire feeder
Sense Lead (work)
Basic Package
K3279-1
K2685-1
K3171-1
K1543-xx
K1785-xx
K1811-xx
Power Wave® S700
Autodrive 4R220 Wire Drive
AutoDrive 19 Tandem
Control Cable (5 pin – 5 pin) - power source to Autodrive 19 Tandem
Control Cable (14 pin – 14 pin) – Autodrive 19 Tandem to wire drive
Sense Lead (work)
Sync Tandem Package (2 of each Required)
K2444-4
K2683-xx
CE, C-Tick Filter Kit
Heavy Duty ArcLink Control Cable
Common Optional Kits
ROBOTIC FEEDER CONTROL CABLES AND ADAPTERS
Model Collar Description for 3rd Generation Power Waves Connectors &
Length
Robotic Wire Drive Cables (14-pin)
K1785-XX
K2709-XX
14M – 14F
14M – 14F
Both ends
On male end
only
• Connects from i400, R350, R500 or AutoDrive 19 to
PF10R version K1780-2 and later or to robot base.
• High Flex for Robots (ACE)
Same as past K680/K681 series.
• Connects AutoDrive Feeder pigtail directly to i400,
R350, R500 or AutoDrive 19 controller.
• Externally mounted wire feeder cable for use with
robot arms not equipped with an integral cable.
Model Collar Description for 3rd Generation Power Waves Connectors &
Length
Cable, Controller, and Power Source Adapters
K1805-1
K1785-2
14M – 22F
(18”)
14M – 14F
(18”)
On male end
only
Both ends • Adapter for i400, R350, R500 or AutoDrive 19 to
allow use of K1795 cable.
• Connects integral robot arm cable to PF10R version
K1780-2 and later.
Model Collar Connectors &
Length
ArcLink Cables (5-pin)
K1543-XX
K2683-XX
5M – 5F
5M – 5F
On male end
only
Brass collar on
male end only