beautypg.com

Lincoln Electric IM10163 FLEX FEED 74 HT User Manual

Page 30

background image

A-23

INSTALLATION

FLEX FEED™ 74 HT

WATER COOLING KIT

The K590-6 water connection kit installs underneath the
wire drive.

1. Turn power OFF at the welding power source.
2. Install the quick disconnect fittings to the plastic

bracket, by holding the rear nut stationary and spinning
the fitting.

3. Cut the tubing to the desired length, and then install

the tubing and hose clamps to the fittings.

FIGURE A.41