Lincoln Electric IM10163 FLEX FEED 74 HT - Manual (Page 29)

A-22
INSTALLATION FLEX FEED™ 74 HT
25. Place the gun adapter into the feed plate. If required,
swap the position of the barbed fitting with the plug.
Assemble the gas hose to the gun adapter.
26. Assemble the wire drive lead to the gun adapter. The
bolt for the wire drive lead will align the gun adapter
with the feed plate as the bolt is tightened. The
terminal of the lead must be in a vertical position.
27. Tighten the set screw to secure the gun adapter in
place.
28. Secure the G7644-1 gun adapter cover in place with
the Phillips screw, lockwasher and plain washer.
TERMINAL OF LEAD
MUST BE VERTICAL
FIGURE A.39
FIGURE A.40
PHILLIPS SCREW,
LOCKWASHER AND
PLAIN WASHER