Lincoln Electric IM10109 CIRCULATOR - Manual (Page 19)

B-3 OPERATION B-3
• Move the “>” cursor to ʻONʼ: Press
M or L.
• Confirm ʻONʼ: Press OK.
The display shows:
• Press to select the applicable time zone. Press
OK.
The display shows
The weekly timer of the PLC arranges the on/off days
and times of the system.
Default setting:
- Monday thru Friday
- On: 07:00 h
- Off: 18:00 h
The weekly timer has three screens for programming
purposes. Additional on/off days and/or times can be
programmed.
To set time and date, proceed as follows;
• Press M to show time and date.
• Press ESC.
• Select ʻSET PARAMʼ Press
M or L.
• Press OK.
• Press or to change the cursor position. Press
M or L to change value.
• Press OK.
If desired, screens 2 and 3 can be used to set addi-
tional on/off days/times of the system.
FREQUENCY INVERTER
The frequency inverter should automatically run in
AUTO mode.
• Check LED on frequency inverter indicating that it
runs in AUTO mode.
• If not: push button “Auto On”.
CIRCULATOR
TIME CONTROLLED OPERATION
1. Turn on the main switch. See Figure B.1.
2. Wait approx. 10 seconds for the system to initialize.
3. Press AUTO (automatic). See Figure B.1.
In AUTO mode, the system runs automatically,
according to the preset timer settings.
SETTING TIMERS
To set time and date, proceed as follows;
• Press M to show time and date.
• Press ESC.
• Select ʻSET..ʼ Press
M or L.
• Confirm ʻSET..ʼ Press OK.
• Move the “>” cursor to ʻClockʼ: Press
M or L.
• Confirm ʻClockʼ: Press OK.
• Move the “>” cursor to ʻSet Clock”: Press
M or L.
• Apply ʻSet Clockʼ: Press OK.
The display shows (example):
• Select the day of week: Press
M or L.
• Move the “>” cursor to the next position:
Press or .
• To change the time: Press
M or L.
• To set the correct time of day, repeat previous steps.
• To set the correct date, repeat previous steps.
• To confirm the entries: Press OK.
• Press ESC twice.
To set summertime/wintertime (if applicable), proceed
as follows.
• Press M to show time and date.
• Press ESC.
• Select ʻSET..ʼ Press
M or L.
• Confirm ʻSET..ʼ Press OK.
• Move the “>” cursor to ʻClockʼ: Press
M or L.
• Confirm ʻClockʼ: Press OK.
• Move the “>” cursor to ʻS/W Time”: Press
M or L.
• Apply ʻSet Clockʼ: Press OK.
The display shows:
Set Clock
Mo 15:30
YYYY-MM-DD
2011-05-26
M
M
>ON
OFF
S/W Time:
Off
EN
M
>On
Off
S/W Time:
On EN
Timer 1 1
D=MTWTF--
On=07:00
Off=17:00 Timer 1, screen 1
Off-time (17:00 h)
On-time (07:00 h)
Weekdays (daily)
M
M