Lincoln Electric IM10109 CIRCULATOR - Manual (Page 10)

A-2 INSTALLATION
CIRCULATOR
A-2
READ ENTIRE INSTALLATION SECTION BEFORE
STARTING INSTALLATION.
Safety Precautions
------------------------------------------------------------
SELECT SUITABLE LOCATION
This product is for INDOOR USE ONLY.
• Do not place equipment near radiant heat sources.
• Do not place in a confined space. Allow a minimum
of 3 feet of clearance around machine at all times for
maintenance requirements.
• The circuit breaker switch on the rear panel is the
input power disconnect device. Do not position the
equipment so that it is difficult to operate the circuit
breaker.
ENVIRONMENTAL AREA
Keep the machine inside and dry at all times. Do not
place it on wet ground or in puddles. Never place liq-
uids on top of the machine.
STACKING
The CIRCULATOR cannot be stacked.
TILTING
Place the CIRCULATOR directly on a secure, level
surface.
ELECTRIC SHOCK can kill.
• Only qualified personnel should per-
form this installation.
• Turn the input power OFF and
unplug the machine from the recep-
tacle before working on this equip-
ment.
• Insulate yourself from the work and ground.
• Always connect the CIRCULATOR to a power sup-
ply grounded according to the National Electrical
Code and local codes.
WARNING
LIFTING
Lifting this machine is NOT recommended without disas-
sembly. If lifting or moving is necessary, follow the
Installation Procedure detailed in this manual.