IEI Integration WAFER-945GSE2 v2.00 User Manual

Page 92

WAFER-945GSE2 3.5" Motherboard

Page 77

option and enter a decimal number between 000 and 127. The temperature range is

specified below.

Minimum Value: 0°C

Maximum Value: 127°C

CPU Fan Start PWM [070]

The CPU Fan Start PWM option can only be set if the CPU FAN Mode Setting option is

set to Automatic mode. Use the CPU Fan Start PWM option to select the PWM mode

the fan starts to rotate with after the temperature specified in the CPU Temperature Limit

of On is exceeded. The Super I/O chipset supports 128 PWM modes. To select a value,

select the CPU Fan Start PWM option and enter a decimal number between 000 and 127.

The temperature range is specified below.

PWM Minimum Mode: 0

PWM Maximum Mode: 127

Slope PWM [0.5 PWM]

The Slope PWM option can only be set if the CPU FAN Mode Setting option is set to

Automatic mode. Use the Slope PWM option to select the linear rate at which the PWM

mode increases with respect to an increase in temperature. A list of available options is

shown below:

0.125

PWM

0.25

PWM

0.5

PWM

The following system parameters and values are shown. The system parameters that are

monitored are:

System Temperatures: The following system temperatures are monitored