4 vga monitor connection, Figure 4-16: usb connector – IEI Integration WAFER-945GSE2 v2.00 User Manual

Page 74

WAFER-945GSE2 3.5" Motherboard

Page 59

Figure 4-16: USB Connector

4.7.4 VGA Monitor Connection

The WAFER-945GSE2 has a single female DB-15 connector on the external peripheral

interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect

a monitor to the WAFER-945GSE2, please follow the instructions below.

Step 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector

Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

WAFER-945GSE2. See Figure 4-17.