1 lan connection, 2 serial device connection, Figure 4-14: lan connection – IEI Integration WAFER-945GSE2 v2.00 User Manual

Page 72

WAFER-945GSE2 3.5" Motherboard

Page 57

4.7.1 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors. The locations of the RJ-45 connectors are

shown in Chapter 3.

Step 2:

Align the connectors. Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the WAFER-945GSE2. See Figure 4-14.

Figure 4-14: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

4.7.2 Serial Device Connection

The WAFER-945GSE2 has a single female DB-9 connector on the external peripheral

interface panel for a serial device. Follow the steps below to connect a serial device to the

WAFER-945GSE2.