IEI Integration WAFER-945GSE2 v2.00 - Manual (Page 101)

WAFER-945GSE2 3.5" Motherboard
Page 86
Disabled USB function disabled
Enabled D EFAULT USB function enabled
Legacy USB Support [Enabled]
Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard
support.
Normally if this option is not enabled, any attached USB mouse or USB keyboard does not
become available until a USB compatible operating system is fully booted with all USB
drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB driver loaded onto the system.
Disabled Legacy USB support disabled
Enabled D EFAULT Legacy USB support enabled
Auto Legacy USB support disabled if no USB devices are
connected
USB 2.0 Controller Mode [HiSpeed]
The USB2.0 Controller Mode BIOS option sets the speed of the USB2.0 controller.
FullSpeed The controller is capable of operating at full speed
12 Mb/s
HiSpeed D EFAULT The controller is capable of operating at high speed
480 Mb/s
5.3.8 iEi Feature
Use the iEi Feature menu (BIOS Menu 13) to configure One Key Recovery function.