IEI Integration PM-PV-N4551_D5251 - Manual (Page 57)

PM-PV-D4251/N4551/D5251 User Manual
Page 45
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-5
Jumper Location: See Figure 4-6
The LCD voltage selection jumper sets the voltage of the power supplied ot the LCD
panel.
Setting Description
1-2 +3.3 V
2-3 +5.0 V
Table 4-5: LVDS Voltage Selection Jumper Settings
Figure 4-6: LVDS Voltage Selection Jumper Locations
4.6.5 PCI-104 Voltage Setup
Jumper Label: JP1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-6
Jumper Location: See Figure 4-7
This jumper selects the voltage supplied to the PCI-104 expansion module.