IEI Integration PM-PV-N4551_D5251 - Manual (Page 50)

PM-PV-D4251/N4551/D5251 User Manual
Page 38
o When working with the PM-PV-D4251/N4551/D5251, make sure that it is
disconnected from all power supplies and that no electricity is being fed
into the system.
Before and during the installation of the PM-PV-D4251/N4551/D5251 DO NOT:
ƒ Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
ƒ Use the product before verifying all the cables and power connectors are
properly connected.
ƒ Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the PM-PV-D4251/N4551/D5251 is properly
installed.
ƒ All the items in the packing list are present
ƒ A compatible memory module is properly inserted into the slot
ƒ The CF Type I or CF Type II card is properly installed into the CF socket
ƒ The jumpers have been properly configured
ƒ The PM-PV-D4251/N4551/D5251 is inserted into a chassis with adequate
ventilation
ƒ The correct power supply is being used
ƒ The following devices are properly connected
o SATA drive
o RS-232 devices
o RS-422/485 devices
o Keyboard and mouse
o LAN
o LCD backlight
o Power
o LVDS LCD screen
o VGA display
o USB port