IEI Integration PM-LX-800 v1.0 - Manual (Page 74)

Page 74
IEI® Technology, Corp.
4.3.11 LPT Port Installation
To connect an LPT port to the motherboard, follow the instructions below.
Step 1:
Step 1:
Step 2:
Step 3:
Step 1:
Step 1:
Step 2:
Connect the 26-pin connector end of an LPT printer cable to the LPT1 header on
the motherboard. A keyed pin on the connector prevents it from being connected
incorrectly. Step 0:
4.3.12 Power Connection
To connect the motherboard to a power supply, follow the instructions below.
Find the power cable in the kit that came with the motherboard.
Connect the 3-pin terminal block connector end of the cable to the CN1 terminal
block on the motherboard. A keyed pin on the connector prevents it from being
connected incorrectly.
Connect the other end of the cable to a power supply. Step 0:
4.3.13 TTL LCD Installation
To connect a TTL LCD to the motherboard, follow the instructions below.
Connect the 40-pin connector end of a TTL LCD cable to the CN4 miniature
crimping connector on the motherboard. A keyed pin on the connector prevents
it from being connected incorrectly. Step 0:
4.3.14 USB Port Installation
The cable used to connect the motherboard to a USB port is an 8-pin header to USB
connector. To connect a USB port to the motherboard, follow the instructions below.
Find the USB cable in the kit that came with the motherboard.
Connect the 8-pin connector end of the cable to the USB1 header on the
motherboard. Be sure to align the red wire on the connector to pin 1 on the
header.