IEI Integration PM-LX-800 v1.0 - Manual (Page 110)

Page 110
IEI® Technology, Corp.
Disabled (Default) ESCD will not be reconfigured
Enabled ESCD will be reconfigured after you exit setup
Resources Controlled By [Auto (ESCD)]
Use the Resources Controlled By option to either manually configure all the boot and
plug and play devices, or allow BIOS to configure these devices automatically. If BIOS is
allowed to configure the devices automatically IRQs, DMA and memory base address
fields cannot be set manually.
Auto(ESCD) (Default) BIOS automatically configures plug and play devices as
well as boot devices.
Manual Manually configure the plug and play devices and any
other boot devices.