Ide disk drive installation, 4 ide disk drive installation, Figure 4-2: connection of ide connector – IEI Integration PM-LX-800 v1.0 User Manual

Page 71: Table 4-1: iei provided cables

Page 71

PM-LX-800 CPU Card

Quantity Type

1 USB

cable

1 VGA

cable

1 LAN

cable

1 Power

cable

Table 4-1: IEI Provided Cables

4.3.4 IDE Disk Drive Installation

The cable used to connect the motherboard to the IDE HDD is a standard 44-pin ATA33

flat cable. To connect an IDE HDD to the motherboard, follow the instructions below.

Step 1:

Step 2:

Step 3:

Step 4:

Find the ATA33 flat cable in the kit that came with the motherboard.

Connect one end of the cable to the IDE1 connector on the motherboard. A

keyed pin on the IDE connectors prevents it from being connected incorrectly.

Locate the red wire on the other side of the cable that corresponds to the pin 1

connector.

Connect the other end of the cable to the HDD making sure that the pin 1 cable

corresponds to pin 1 on the connector.

Step 0:

Figure 4-2: Connection of IDE Connector