IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 97)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 84
Î Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Î
Auto D EFAULT The parallel port IO port address and interrupt
address are automatically detected.
Î
IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7
Î
IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7
Î
IO=3BCh;
IRQ=7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ7
Î
IO=378h Parallel Port I/O port address is 378h
Î
IO=278h Parallel Port I/O port address is 278h
Î
IO=3BCh Parallel Port I/O port address is 3BCh
Î Device Mode [Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
ƒ Printer Mode Default
ƒ SPP Mode
ƒ EPP-1.9 and SPP Mode
ƒ EPP-1.7 and SPP Mode
ƒ ECP Mode
ƒ ECP and EPP 1.9 Mode
ƒ ECP and EPP 1.7 Mode
5.3.7 H/W Monitor
The H/W Monitor menu (BIOS Menu 12) shows the operating temperature, fan speeds
and system voltages.