IEI Integration NANO-PV-D4251_N4551_D5251 - Manual (Page 95)

NANO-PV-D4251/N4551/D5251 EPIC SBC
Page 82
5.3.6.2 IrDA Configuration
Use the IrDA Configuration menu (BIOS Menu 9) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
IrDA Configuration
IrDA [Enabled]
Device Settings IO=2E0h; IRQ=10
Change Settings
[Auto]
Enable or Disable IrDA
---------------------
ÅÆ: Select Screen
↑ ↓: Select Item
Enter
Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 10: IrDA Configuration Menu
Î IrDA [Enabled]
Use the IrDA option to enable or disable the infrared function.
Î
Disabled Disable the infrared function
Î
Enabled D EFAULT Enable the infrared function
Î Change Settings [Auto]
Use the Change Settings option to change the IrDA I/O port address and interrupt
address.
Î
Auto D EFAULT The IrDA I/O port address and interrupt address are
automatically detected.
Î
IO=2E0h;
IRQ=10
IrDA I/O port address is 2E0h and the interrupt
address is IRQ10
Î
IO=2C0h;
IRQ=10, 11
IrDA I/O port address is 2C0h and the interrupt
address is IRQ10, 11