IEI Integration NANO-9452 v4.01 - Manual (Page 117)

NANO-9452 EPIC Motherboard
Page 99
 Legacy IDE Channels [PATA Pri, SATA Sec]

SATA Only

PATA Pri, SATA Sec D EFAULT

PATA Pri., PATA Sec
 IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
 Primary IDE Master
 Primary IDE Slave
 Secondary IDE Master
 Secondary IDE Slave
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.