beautypg.com

IEI Integration PICOe-PV-D4251_N4551_D5251 v1.10 User Manual

Page 72

background image

PICOe-PV-D4251/N4551/D5251 User Manual

Page 58

the PICOe-PV-D4251/N4551/D5251 LPT box-header connector. See Figure

4-15.

Step 3:

Insert the cable connectors

.

Once the cable connector is properly aligned with

the 26-pin box-header connector on the PICOe-PV-D4251/N4551/D5251,

connect the cable connector to the on-board connector. See Figure 4-15.

Figure 4-15: LPT Cable Connection

Step 4:

Attach the LPT connector to the chassis. To secure the LPT interface

connector to the chassis please refer to the installation instructions that came

with the chassis.

Step 5:

Connect LPT device. Once the LPT interface connector is connected to the

chassis, the LPT device can be connected to the LPT interface connector. See

Figure 4-16

See also other documents in the category IEI Integration Hardware: