IEI Integration PCISA-9652 v1.01 User Manual

Page 98

PCISA-9652 Half-Size CPU Card

Page 78

CPU socket should be in the unlocked position. If it is not in the unlocked

position, use a screwdriver to unlock the screw. See Figure 5-1.

Figure 5-1: Make sure the CPU socket retention screw is unlocked

Step 2:

Inspect the CPU socket. Make sure there are no bent pins and make sure the

socket contacts are free of foreign material. If any debris is found, remove it with

compressed air.

Step 3:

Correctly Orientate the CPU. Make sure the IHS (integrated heat sink) side is

facing upwards.

Step 4:

Correctly position the CPU. Match the Pin 1 mark with the cut edge on the

CPU socket. See Figure 5-1.

Step 5:

Align the CPU pins. Carefully align the CPU pins with the holes in the CPU

socket.

Step 6:

Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are

properly aligned, the CPU should slide into the CPU socket smoothly.

Step 7:

Lock the retention screw. Rotate the retention screw into the locked position.

Step 0: